Standard Bolt Protector (3.93"x2.75"x1.25")

Applications: They are often effectively used on a variety of buckets, loaders, excavators, earth moving equipment, draglines and bolt protection etc. with any layout of pattern designed to suit your particular wear area, providing maximum protection and...

Standard Bolt Protector (3.93"x1.96"x0.98")

Applications: They are often effectively used on a variety of buckets, loaders, excavators, earth moving equipment, draglines and bolt protection etc. with any layout of pattern designed to suit your particular wear area, providing maximum protection and...

Skid Block (9.84"x9.84"x1.88")

Applications: •Bucket wear strips.•Replaces hard facing for augers, directional drill heads, foundation drilling, raise bore drilling.•Fan blade liners.•Pug mill paddles, tip and scrapers.•Recycling industry.•Road planer...

Skid Block (9.84"x5.90"x1.45")

Applications: •Bucket wear strips.•Replaces hard facing for augers, directional drill heads, foundation drilling, raise bore drilling.•Fan blade liners.•Pug mill paddles, tip and scrapers.•Recycling industry.•Road planer...

F80RB Futura Roll Bar

Applications: •Bucket wear strips.•Replaces hard facing for augers, directional drill heads, foundation drilling, raise bore drilling.•Fan blade liners.•Pug mill paddles, tip and scrapers.•Recycling industry.•Road planer...

F55RBHD Futura Roll Bar (12.01"x2.59"x2.80")

Applications: •Bucket wear strips.•Replaces hard facing for augers, directional drill heads, foundation drilling, raise bore drilling.•Fan blade liners.•Pug mill paddles, tip and scrapers.•Recycling industry.•Road planer...

F55RB Futura Roll Bar (12.01"x1.73"x2.12")

Applications: •Bucket wear strips.•Replaces hard facing for augers, directional drill heads, foundation drilling, raise bore drilling.•Fan blade liners.•Pug mill paddles, tip and scrapers.•Recycling industry.•Road planer...

F35RB Futura Roll Bar (9.01"x1.06"x1.57")

Applications: •Bucket wear strips.•Replaces hard facing for augers, directional drill heads, foundation drilling, raise bore drilling.•Fan blade liners.•Pug mill paddles, tip and scrapers.•Recycling industry.•Road planer...

WS50N Standard Wafer Strip (9.44"x1.96"x0.47")

•CP Wafer Strips are metallurgically bonded to a weldable, impact resistant backing plate. •CP Wafer Strips are easy to use and install. •They can be bent, cut and formed to suit different surfaces. •These benefits lead to...

WS40N Standard Wafer Strip (9.44"x1.57"x0.47")

•CP Wafer Strips are metallurgically bonded to a weldable, impact resistant backing plate. •CP Wafer Strips are easy to use and install. •They can be bent, cut and formed to suit different surfaces. •These benefits lead to...

WS25N Standard Wafer Strip (9.44"x0.98"x0.47")

•CP Wafer Strips are metallurgically bonded to a weldable, impact resistant backing plate. •CP Wafer Strips are easy to use and install. •They can be bent, cut and formed to suit different surfaces. •These benefits lead to...

WB115 Futura White Iron Wear Button

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

WB90HD Futura White Iron Wear Button

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

WB90 Futura White Iron Wear Button

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

WB75 Futura White Iron Wear Button

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

WB60 Futura White Iron Wear Button

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

CB130 Futura White Iron Chocky Wear Bar

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

CB100 Futura White Iron Chocky Wear Bar

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

CB65 Futura White Iron Chocky Wear Bar

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

CB50 Futura White Iron Chocky Wear Bar

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

CB40 Futura White Iron Chocky Wear Bar

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

CB25 Futura White Iron Chocky Wear Bar

• 20% MORE wear material than normal chocky bars and buttons. •Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and...

Cast Wear Runner Kit (8.11"x8.11"x3.11")

Cast Wear Runner Kits For high abrasion, high impact applications ➢Vertical Bucket Protection➢ Horizontal Bucket Protection➢ Chute Linings Includes Weld on Base Wear Runner Hardware

Cast Wear Runner Kit (8.11"x8.11"x2.32")

Cast Wear Runner Kits For high abrasion, high impact applications ➢Vertical Bucket Protection➢ Horizontal Bucket Protection➢ Chute Linings Includes Weld on Base Wear Runner Hardware

Cast Wear Runner Kit (8.11"x8.11"x1.92")

Cast Wear Runner Kits For high abrasion, high impact applications ➢Vertical Bucket Protection➢ Horizontal Bucket Protection➢ Chute Linings Includes Weld on Base Wear Runner Hardware

Cast Wear Runner Kit (8.11"x8.11"x1.53")

Cast Wear Runner Kits For high abrasion, high impact applications ➢Vertical Bucket Protection➢ Horizontal Bucket Protection➢ Chute Linings Includes Weld on Base Wear Runner Hardware

Weld on Armored Bar (100x15x3x25)

For use in high wear regions, on all types of machines

Weld on Armored Bar (80x10x2.5x22)

For use in high wear regions, on all types of machines

Bimetallic Steel Weld on Wear Plate (4"x5"x15/64")

One of the fastest, simplest and most cost-effective methods available in the construction industry today for hardfacing and high wear- moderate impact areas. For use on: Loaders Backhoes Excavators Scrapers Dozers Chutes Drag Lines Truck...

Bimetallic Steel Wear Plate (5"x7"x15/64")

One of the fastest, simplest and most cost-effective methods available in the construction industry today for hardfacing and high wear- moderate impact areas. For use on: Loaders Backhoes Excavators Scrapers Dozers Chutes Drag Lines Truck...

Bimetallic Steel Weld on Wear Plate (3"x4"x3/16")

One of the fastest, simplest and most cost-effective methods available in the construction industry today for hardfacing and high wear- moderate impact areas. For use on: Loaders Backhoes Excavators Scrapers Dozers Chutes Drag Lines Truck...

500 HB Steel Weld on Wear Plate (4"x5"x15/64")

One of the fastest, simplest and most cost-effective methods available in the construction industry today for hardfacing and high wear- moderate impact areas. For use on: Loaders Backhoes Excavators Scrapers Dozers Chutes Drag Lines Truck...

500 HB Steel Weld on Wear Plate (5"x7"x1/4")

One of the fastest, simplest and most cost-effective methods available in the construction industry today for hardfacing and high wear- moderate impact areas. For use on: Loaders Backhoes Excavators Scrapers Dozers Chutes Drag Lines Truck...

500 HB Steel Weld on Wear Plate (3"x4"x3/16")

One of the fastest, simplest and most cost-effective methods available in the construction industry today for hardfacing and high wear- moderate impact areas. For use on: Loaders Backhoes Excavators Scrapers Dozers Chutes Drag Lines Truck...

Weld on Wear Plate 5"x7"x1/4" (Box of 26)

One of the fastest, simplest and most cost-effective methods available in the construction industry today for hardfacing and high wear- moderate impact areas. For use on: Loaders Backhoes Excavators Scrapers Dozers Chutes Drag Lines Truck...

Weld on Wear Plate 4"x5"x1/4" (Box of 44)

One of the fastest, simplest and most cost-effective methods available in the construction industry today for hardfacing and high wear- moderate impact areas. For use on: Loaders Backhoes Excavators Scrapers Dozers Chutes Drag Lines Truck...

Weld on Wear Plate 3"x4"x3/16" (Box of 48)

One of the fastest, simplest and most cost-effective methods available in the construction industry today for hardfacing and high wear- moderate impact areas. For use on: Loaders Backhoes Excavators Scrapers Dozers Chutes Drag Lines Truck...

Weld on Wear Plate 3"x4"x1/4" (Box of 36)

One of the fastest, simplest and most cost-effective methods available in the construction industry today for hardfacing and high wear- moderate impact areas. For use on: Loaders Backhoes Excavators Scrapers Dozers Chutes Drag Lines Truck...

CB25 White Iron Chocky Wear Bar

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...

WB150 White Iron Chocky Wear Button

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...

WB115 White Iron Chocky Wear Button

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...

WB90 White Iron Chocky Wear Button

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...

WB75 White Iron Chocky Wear Button

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...

WB60 White Iron Chocky Wear Button

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...

CB130 White Iron Chocky Wear Bar

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...

CB100 White Iron Chocky Wear Bar

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...

CB65 White Iron Chocky Wear Bar

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...

CB50 White Iron Chocky Wear Bar

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...

CB40 White Iron Chocky Wear Bar

•Construction Parts Infinity wear buttons, blocks, bars and runners are a chrome white iron (CWI) casting on a mild steel backing plate. •There is a variety of shapes and sizes to protect any high wear area on mobile or stationary machinery...