RV550LD REVOLUTION®LOADER HAMMERLESS BUCKET TOOTH (J550)

RV550LD

Fully hammerless installation & removal for safe and easy use.

• Accept both inch or metric socket, female square drive on opposite end.
• Lock and pin may be used on either side of nose.
• Locks with 180° clockwise turn of pin with socket wrench.
• Pin removal pulls out excess material around the pin head.

Fully Stabilized Nose & Tooth Pocket

-Primary contact for frontal loads.
-Bottom out fit with pocket mitigates fit erosion through service life.
-Secondary contact areas for off center frontal loads.
-Planer bearing areas provide longer service life.
-Redundant frontal load bearing if the primary and secondary areas are worn from tooth overuse.
-Front = Primary bearing area for vertical tooth loads.
-Rear (opposite side) = Reactive load bearing area for vertical loads.
-V design forces the tooth to center on the nose when heavy side forces are encountered. Preventing pin loading and increases fit integrity.

Description

RV550LD – RV550 LD TOOTH

THICKNESS: 9.06 ”
WIDTH: 5.677 ”
LENGTH: 16.979 ”
BLADE TYPE: TOOTH
HOLE QTY: 1
HOLE 1 DIST END: 0.000 ”
HOLE 1 DIST 1 TO 2: 0.000 ”
HOLE 1 DIST 2 TO 3: 0.000 “

Additional information

Weight 84.00 lbs
Dimensions 16.979 × 5.677 × 9.06 in

Go to Top